![]() |
|
||
|
|||
![]() |
![]() |
![]() |
![]() |
![]() |
|
| (1) | Install the PC at the refueling station and the supervising company
office. Monitoring and filing the date such as each stage discharge temperature and Pressure automatically. |
| (2) | Sensing higher temperature and/or pressure than the rated temperature and/or Pressure, then transmit the alarm signal through the Internet cable and send the data to e-mail address of the supervisor automatically. |
| (3) | Supervisor can receive alarm signal by the cell phone at any place. |
| (4) | Supervisor can access the internet and can receive the necessary data
from the mail server. This enables the supervisor to check the cause of trouble and instruct the countermeasure immediately. |
|
| (1) | So far, typical monitoring system is only alarming the high temperature
and/or pressure and it was quite difficult to presume the cause of these
alarms because there are no detail operational data. Therefore, only the expert can presume the cause of the trouble. |
| (2) | This monitoring system enables us to presume and find the cause of trouble or initial abnormal condition properly. |
|
| Improvement of the maintenance and save the operational fee | |
| (1) | Initial abnormality can be easily found and first aid will be given by reading the operational data. |
| (2) | The cause of the trouble or abnormality can be investigated immediately. |
| (3) | A proper diagnosis can be made and the recovery time can be shorten by supplying necessary repair parts. |
| (4) | Serious damage can be prevented and maintenance cost can be saved by preventing the serious damage. |
| (5) | Checking data makes fewer maintenance and it saves energy. |
| (6) | Long distance communication fee can be saved by using the internet. |
| (7) | No expert is required by sending the date file immediately after the abnormality was found. |
| (8) | Even so small abnormality that is difficult to be found by human can be found easily. |
| (9) | Expert can observe and make a diagnosis when they received the data which were sent from different places. |
| >HOME |