Production range | Gas Compressor | CNG Compressor Monitoring system | PET blowing
SF6 gas handing equipment

Ever green earth for precious heart

SF6 Gas Handing Equipment

This equipment has reliable function and being supplied a lot to electrical industries for installation, regular maintenance, performance test, R&D of GIS and GCB

Feauture

Rich experience We have supplied over 1000 sets during last 30 years and our units are used for particle accelerates machinery, electron microscopes, atomic power test plants. The equipment has been improved by us based on our rich experience and systematically designed for functionally reliable and suitable model for suctioning, liquefaction, purification and refilling.

KL40V-3.7OL-SP

Products

SF6 gas recovery equipment storage in gaseous form (portable and stationary) SF6 gas recovery equipment storage in liquid form (portable and stationary) SF6 gas integrated type recovery equipment SF6 gas charging unit for gas transformer

SF6 Gas Handing Equipment

Portable and gas form storage SF6 gas recovering equipment Suctioning, Compressing, Purification and charging Model: KG10V-3.7OL-SP Dimension (L*W*H) 1700*1000*1400 Gross weight : 750kg Sound level : Approx. 80dB (A)

Feauture

Air-cooled oil-less compressor and oil-less vacuum pump are used No oil contamination in the recovered SF6 gas Portable, compact & light weight (40% small in volume, 50% light weight compare to existing model) Easy for valve operation Care for environment (Few disposal of used oil)

Function (available for 50 and 60 Hz)

(1) Theoretical time for suctioning approx. 60 /70min (60/50Hz) approx. 62 min. for 50 Hz exclusive type (2) Theoretical time for charging approx.60 min (1.7m3, 133kPa~0.7MPaG) (3) Theoretical time for evacuating approx. 30/35min(60/50Hz) approx. 30min for 50Hz exclusive type (1.7m3, Atm.~133Pa.abs) (4) Refining Vapor : less than 65vol ppm Oil mist : less than 5wt ppm Dust : less than 0.9micronm

Note: Above calculation is based on 1.5m3 storage volume, 0 MPaG SF6 gas pressures, and the pressure loss of the hose and valve is not considered.

>HOME

KAJI TECHNOLOGY CORPORATION